JH-5020A高分子AKD乳化剂
一、产品主要技术指标:
外观： 无色至淡黄色透明液体
含量(%)： 40±1
PH值(1%)： 3-7
粘度(mpa.s（25゜C)： 5000-12000
二、产品应用及特性：
本品可直接添加到中间体的合成过程中，或在乳液中按一定比例添加，对阴离子垃圾较重的抄造系统可适当调整用量，作为浆料电位平衡剂，起到施胶增效和催熟化的双重作用，本品显著提高AKD中性胶的稳定性及施胶效果！限制AKD的水解和迁移倾向，对AKD乳胶起很好的保护作用，加速AKD 的熟化。JH-5020A也可作为A4纸用抗静电剂，助留增强分散剂和彩色纸的固色剂用。
三、产品使用方法及注意事项：
1、每吨AKD乳液，加入JH-5020A高分子乳化剂10kg-30kg.
2、高分子乳化剂添加量越多，后期施胶效果越好，但用量过高时可能会导致AKD乳液局部沉淀；添加本品可延长AKD乳液的存放时间。
四、产品包装及 贮存：
本品采用200Kg、1000kg塑桶包装；储存于阴凉处,避免冰冻和日晒。 储存期12个月。
JH-5020A Polymer AKD Emulsifier
Main technical indexes :
Appearance: Colorless to light yellow transparent liquid
Solid content:40±1%
PH value：3-7
Viscosity（mpa.s（25℃））：5000-12000
Application and characteristics：
This product can be directly added to the synthesis of intermediates or the emulsion in certain proportional . It can also appropriate to adjust the dosage of anionic trash heavier production system.As the slurry potential balance agent, it plays a dual role of sizing and dematuration.This product significantly improves the stability of AKD sizing agent! Limited hydrolysis and AKD migration tendency, a good protective effect on AKD emulsion, curing accelerated AKD . JH-5020A can also be used as A4 paper with antistatic agent, retention enhancing dispersant and color paper with fixing agent.
Usage method:
1. Per ton of AKD emulsion, adding JH-5020A polymer emulsifier 10kg-30kg.
2. The more amount of polymer emulsifier added,, the better the effect of the later sizing effect, but if the amount is too much may lead to local precipitation of AKD emulsion；adding this product can prolong the storage life of AKD emulsion.
Package and storage:
200kg per drum or 1000kg IBC drum
Stored in a cool place, avoid freezing and sun.
Storage period: 12 months
